Off White Gradient

How it Works

8 Steps to Windshield Repair

  1. Inspect the chip for damage and loose debris. In addition to hidden cracks & voids.
  2. Apply the base over the chip & insert the Glasweld Zoom. Now its time to pull a vacuum to expel air from the chip.
  3. The Zoom is ready for resin to be injected into chip via the pit of the chip or in rare cases, drilling a hole to provide an entry point.
  4. Leave the Zoom in place for 5 minutes, allowing the resin to penetrate the entire chip/crack.
  5. Remove the injector from the windshield & apply a dot of pit resin to fill in the initial impact point. It is also covered with a mylar tab to promote curing.
  6. Whether with a UV light or natural sunlight, the technician now allows the repair to cure, usually taking about 5 minutes.
  7. The tab is removed & the repair site is scraped down to become flush with the glass.
  8. The final step is to clean the area & apply pit polish to the chip to optically match the windshield.


Having your windshield repaired shouldn't have to slow your life down. Our mobile technicians can meet you anywhere to perform the repair. Our Free Mobile Service adds convenience to your busy schedule. Repairs take about 20 mins. with instant cure time.

2024 GlassBond Windshield Mobile Service, All Rights Reserved